SIGN UP FOR OUR NEWSLETTER
Receive our latest updates about our products & promotions.
info@aceland.store
🚚Free Shipping To Commercial & Residential Location W/Liftgate
Call / Text: 626-362-2567 | 909-908-8170 | 657-286-9925
No se pudo cargar la disponibilidad de recogida
Free curbside delivery in all lower 48.
No inside delivery due to liability.
The Everest Refrigeration EPR2-24 sandwich and salad prep table features a 121/4-inch-deep cutting board for food prep. Its stainless steel opening, which has a 12-pan capacity, enables operators to keep deli meats and produce close at hand. The insulated stainless steel hood protects displayed items from contaminants. Its 9-cubic-foot compartment below holds four shelves—two per compartment—to keep the space organized. The interior and exterior are made of stainless steel, while the bottom and rear feature a durable galvanized steel construction. To illuminate the cabinet, this unit features an LED lighting system.
The Everest Refrigeration EPR2-24 sandwich and salad prep table is simple to install because of its self-contained refrigeration system. It uses R290 refrigerant to maintain consistent conditions between 33 and 54 degrees Fahrenheit, which is controlled via the multi-functional control panel. To quicky pull down temperatures and minimize recovery times, it’s equipped with electronically commutated fan motors. To maintain the unit, it features an automatic defrost system and self-maintaining condensate pan.
Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.
*Free shipping on Everest Refrigeration EPR2-24 within the 48 contiguous states.
Spec Attribute | Spec Value |
---|---|
Manufacturer | Everest Refrigeration |
Cutting Board Depth (in) | 12.25 |
Depth (in) | 23.63 |
Front Access | Door |
Height (in) | 35 |
Hertz | 60 |
Type | Standard |
Use | Sandwich/Salad |
Voltage | 115 |
Warranty | 3-year Parts & Labor; 5-year Electrical; 10-year Compressor |
Width (in) | 47.5 |
Series | EP Series |
Refrigerant | R290 (Hydrocarbon) |
No. of Doors | 2 |
Phase | 1 |
Rating | Better |
Product | Prep Tables |
Product Type | Commercial Refrigeration |
NEMA | 5-15P |
Max Pan Depth (in) | 6 |
Weight | 229.00 |
Sandwich Prep Table, two-section, 47-1/2"W, 9.0 cu. ft. capacity, stainless steel top with opening for (12) 1/9 size pans, (1) 1/2" thick insulated top lid, (2) solid hinged self-closing doors, snap-in magnetic door gasket, (4) epoxy coated adjustable wire shelves, (1) 12-1/4"D removable cutting board, digital controls with LED display, +33°F to +54°F temperature range, auto defrost, LED interior lighting, overheat protection alarm for compressor & condenser coil, stainless steel interior, stainless steel front, top & sides, galvanized steel bottom & rear, self-contained side mounted refrigeration, (4) 5" swivel casters (2 locking), R290 Hydrocarbon refrigerant, 1,557 BTU/hr, 1/4+ HP, 115v/60/1-ph, 3.48 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation
*Image may not depict product color, inclusions or accessories.
This product includes a cord and plug
Product made with Hydrocarbon Refrigerants
Aceland Corporation offers free curbside shipping for all items, excluding additional accessorial charges (i.e. limited access, redelivery fee, detention fee, etc), unless additionally specified, to all US states, except Hawaii and Alaska (For shipments going to Hawaii and Alaska, please feel free to reach out to us for a competitive quote). Shipping normally takes 2-8 business days, inapplicable to unexpected special occasions that might delay the shipments. Standard Shipping Notes: *Our shipments are not guaranteed delivery, as we cannot control the carrier service once the order has been shipped. The exception to this is orders are placed and shipped using methods that include a guaranteed delivery date. *If an order is cancelled or refused (unless refused as damaged shipment) after it has been shipped, a 25% restocking fee and the full freight cost will be charged to the customer. *Please inspect all units upon arrival no matter what the outside packaging looks like. If there are too many units to inspect, or you are unsure about the inside condition, or the driver refuses to let you inspect the equipment, you MUST write on the proof of delivery/delivery slip before the driver leaves "SUBJECT TO INSPECTION". Failure to do so will result in the loss of a claim and we will not be able to send replacement parts, issue a discount or replace the equipment. Please see the attached for more freight receipt precautions. Aceland cannot be held liable for those damages not listed in the freight acceptance form!
Items must be returned in NEW (unused, untested, and resalable) condition, in the original manufacturer packaging, with all accessories, kit components, promotional items and instruction manuals included. For your protection, items must be returned shipping prepaid, insured for the full value and safely wrapped to prevent shipping damage. Items that have been used by the customer or items that have been damaged by use cannot be returned to us. We also cannot accept returns on orders where a promotional item has not been returned with the order. These ‘extras’ must be included with your return to qualify for a full refund. When repacking an item for return, please be sure to include all the free and promotional items that came with your order as well as all applicable accessories and literature. Generally, as a “rule-of-thumb" you should return the items to us the same way we sent them to you - in the same condition and with all the original contents. If a promotional item is missing, its value will be added to the original price you paid for the order, thus reducing the amount of the refund, if such is issued. All return requests for the orders with any shipments that are drop shipped from our suppliers, we will need follow the return and refund policies by the suppliers. We do not accept returns on customized orders.
To qualify for a refund, our Return Conditions and Return and Exchange Instructions must be followed. If our steps are not followed, a refund may be issued in accordance with the condition of the returned merchandise and the value of any missing items. Refunds are not issued before the merchandise has been received, evaluated and processed by our Returns Team. Our/Manufacturer’s restocking fee charge(s) may differ, to cover our processing, packing and shipping expenses. Additional fees may apply if the item is not returned in its original packaging. Your satisfaction is always our top priority. We work with our vendor partners to guarantee the quality of our products and we want you to be completely satisfied with your purchase. If for any reason you are not completely satisfied with your purchase, Please call us.